Prevent electrostatic discharge, About the module, Prevent electrostatic discharge about the module – Rockwell Automation 1756-EN3TR ControlLogix EtherNet/IP Communication Module Installation Instructions User Manual
Page 5

5
Publication
1756-IN612B-EN-P - December 2009
Prevent Electrostatic Discharge
About the Module
The module provides EtherNet/IP connectivity. Use the tap to support
linear, star, and device-level ring (DLR) topologies. The module is configured
by default to support linear and star topologies. When setting up a DLR,
follow the steps in the
Use the Module in a Device-level Ring (DLR) Network
section on
page 15
to avoid adversely impacting your network.
publication
ENET-AP005
, for information on setting up EtherNet/IP
network topologies.
ATTENTION
This equipment is sensitive to electrostatic discharge, which can
cause internal damage and affect normal operation. Follow these
guidelines when you handle this equipment:
•
Touch a grounded object to discharge potential static.
•
Wear an approved grounding wriststrap.
•
Do not touch connectors or pins on component boards.
•
Do not touch circuit components inside the equipment.
•
Use a static-safe workstation, if available.
•
Store the equipment in appropriate static-safe packaging when not in
use.