beautypg.com

18 publication, Slide the module out of chassis – Rockwell Automation 1756-EN3TR ControlLogix EtherNet/IP Communication Module Installation Instructions User Manual

Page 18

background image

18

Publication

1756-IN612B-EN-P - December 2009

To remove or replace the module, use this procedure.

1. Push on the upper and lower module tabs to disengage them.

31590-M

2. Slide the module out of chassis.

31591-M

If you want to replace an existing module with an identical one, and you
want to resume identical system operation, you must install the new module
in the same slot.

IMPORTANT