Rockwell Automation 1756-EN3TR ControlLogix EtherNet/IP Communication Module Installation Instructions User Manual
Controllogix ethernet/ip communication module, Installation instructions
Installation Instructions
ControlLogix EtherNet/IP Communication
Module
Catalog Numbers 1756-EN2TR, 1756-EN3TR
Topic
Page
Prevent Electrostatic Discharge
This manual is related to the following products:
Table of contents
Document Outline
- 1756-IN612B-EN-P, ControlLogix EtherNet/IP Communication Module Installation Instructions
- Important User Information
- Environment and Enclosure
- North American Hazardous Location Approval
- Prevent Electrostatic Discharge
- About the Module
- Before You Begin
- Install the Module
- Wire the Ethernet Connector
- Grounding Considerations
- Connect the Module to the EtherNet/IP Network
- Download the 1756-EN2TR Module Add-on Profile (AOP) [RSLogix 5000 Software Version 17.01 Only]
- Use the Module in a Device-level Ring (DLR) Network
- Connect to the Module via the USB Port
- Apply Chassis Power and Check Status Indicators
- Install or Remove the Module Under Power
- Status Indicators
- Specifications
- Additional Resources
- Back Cover