Rockwell Automation 1492-PRINT110_PRINT220 ClearMark Printer User Manual - Manual (Page 64)

7-4 Rockwell Automation Publication 1492-UM008A-EN-P - June 2010
Chapter 7 Maintenance
Replacing the Ink
Cartridges Handling Ink Cartridges
• Store unopened ink cartridges in a cool and dry place, preferably in a
refrigerator at +40 °F (+4 °C).
• Before using an ink cartridge that has been stored in a colder place,
allow the cartridge to adjust to the room temperature for at least three
hours.
• Install ink cartridges immediately after removing from the packaging.
The print quality can be impaired if an ink cartridge is left unpacked for
any length of time before use.
• Keep ink cartridges out of reach of children.
• If you get ink on your skin, wash thoroughly with soap and water.
• Do not shake ink cartridges, as this can cause ink to leak.
• Do not use ink cartridges beyond the expiration date printed on the
cartridge packaging.
• For best results, the ink in the cartridge should be used within six
months of installation.
• Do not take apart or try to refill ink cartridges. This could result in
damage to the print head.
• Ink is used when a new ink cartridge is inserted and when the ink tank
cover is opened, because the ClearMark printer always carries out a
reliability check.
• Always handle ink cartridges with care, otherwise ink could spill and
cause contamination.
• Never touch the ink supply outlet of the ink cartridge or the area
around it.
• Please note that it is possible that the ink cartridges could fall out of the
carrier.
ATTENTION: The ink cartridges are sealed units. Under normal
circumstances, ink will not leak out of an ink cartridge. If you
get ink on your hands, wash them thoroughly with soap and
water. If you get ink in your eyes, rinse immediately with water.