Rockwell Automation 931U-C9C7C-BC Configurator Software - Manual (Page 44)

Page | 44
• Alarm2: Shows the status of the second alarm
relay
- LED = red = relay switched on (alarm)
- LED = off = relay switched off (no alarm)
7.7 Product identification
Unit Type: Description of the module
Serial No.: The serial number is
printed on the side of the
module.
Firmware No.: The firmware number of
the 931U‐C9C7C‐BC which
is connected.
Configured by: The company name of the
person who last config‐
ured the module.
Initials: Initials or the name of the
person who last config‐
ured the module.
Date: The date when the mod‐
ule was last configured
the module.
ID Tag: Typically, the user’s plant
reference
User Reference: User descriptor
Version: The Version of the soft‐
ware
Terminals: Shows the terminal num‐
ber where the sensor and
output signals are con‐
nected.
Table 10 Product identification