Rockwell Automation 931U-C9C7C-BC Configurator Software - Manual (Page 27)

Page | 27
6.1 Default setting
Input range 4‐20 mA
ADS Speed medium
Transfer function Linear
Response time 0.25 s
Output range 4‐20 mA
Action direct
Low limit 0 mA
High Limit 20 mA
Output @ error 21.5 mA
Digital outputs 1 and
2 Disabled
Table 8 Default settings
6.2 931U-CABLE USB introduc-
tion
The 931U‐CABLE is the configuration interface for
the 931U‐C9C7C‐BC. This is the same interface as
can be used for configuring the 931U‐C9A2C‐OP
Signal conditioner.
Connection to the computer is via USB port, and to
the 931U‐C9C7C‐BC via a jack connector. Tx and Rx
status are indicated by LEDs on the 931U‐CABLE.