Rockwell Automation 20-COMM-M Modbus/TCP Adapter - Manual (Page 27)

Configuring the Adapter 3-5
20-COMM-M Modbus/TCP Adapter User Manual
Publication 20COMM-UM014C-EN-P
8. Click OK to apply the settings. The adapter appears in the Relation List
( Figure 3.4 ) with the new settings.
Figure 3.4 BOOTP Server Window with Adapter in the Relation List
9. To assign this configuration to the adapter permanently, select the
device in the Relation List and click Disable BOOTP/DHCP. When
power is cycled on the adapter, it will use the configuration you
assigned it and not issue new BOOTP requests.
10. To save the Relation List, select File > Save.
TIP: To enable BOOTP for an adapter that has had BOOTP disabled,
first select the adapter in the Relation List, then click Enable BOOTP,
and finally reset the adapter or power cycle the drive.