Brother iPrint&Scan MFC-8950DW - Manual (Page 89)

Glossary
83
C
Easy Receive
Enables your machine to respond to CNG
tones if you interrupt a fax call by
answering it.
ECM (Error Correction Mode)
Detects errors during fax transmission
and resends the pages of the fax that had
an error.
Extension telephone
A telephone on the fax number that is
plugged into a separate telephone wall
jack.
External telephone
A telephone that is plugged into the EXT
jack of your machine.
F/T Ring Time
The length of time that the Brother
machine pseudo/double-rings (when the
Receive Mode setting is Fax/Tel) to notify
you to pick up a voice call that it answered.
Fax Forwarding
Sends a fax received into the memory to
another pre-programmed fax number.
Fax Journal
Lists information about the last
200 incoming and outgoing faxes. TX
means Transmit. RX means Receive.
Fax Receive Code
(Fax/Tel mode only)
Press this code (l51) when you answer a
fax call on an extension or external
telephone.
Fax Storage
You can store faxes in the memory.
Fax tones
The signals sent by sending and receiving
fax machines while communicating
information.
Fax/Tel
You can receive faxes and telephone
calls. Do not use this mode if you are
using a telephone answering device
(TAD).
Fine resolution
Resolution is 203 × 196 dpi. It is used for
small print and graphs.
Gray Scale
The shades of gray available for copying
and faxing photographs.
Group number
A combination of One Touch and
Speed Dial numbers that are stored on an
One Touch button or in a Speed Dial
location for Broadcasting.
Journal Period
The pre-programmed time period
between automatically printed Fax
Journal Reports. You can print the Fax
Journal on demand without interrupting
the cycle.
LCD (liquid crystal display)
The display screen on the machine that
shows interactive messages during
On-Screen Programming and shows the
date and time when the machine is idle.
Manual fax
When you press Hook to hear the
receiving fax machine answer before you
press Start to begin transmission.
Menu mode
Programming mode for changing your
machine’s settings.
OCR (optical character recognition)
Nuance™ PaperPort™ 12SE or Presto!
PageManager software application
converts an image of text to text you can
edit.
One Touch
Buttons on the machine’s Touchscreen
where you can store numbers for easy
dialing. You can store a second number
on each key if you press
and then
press the One Touch button where you
want to store the second number.
Out of Paper Reception
Receives faxes into the machine’s
memory when the machine is out of paper.
17- 32