Brother iPrint&Scan MFC-8950DW - Manual (Page 66)

Chapter 7
60
Setting your changes as the
new default
7
You can save the copy settings for Quality,
Brightness
and Contrast you use most
often by setting them as the default. These
settings will stay until you change them again.
a
Press Copy.
b
Press d or c to choose the setting you
want to change, and then press the new
option.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press
d
or c to display Set New Default.
Press Set New Default.
d
Press Yes.
e
Press Stop/Exit.
Restoring all copy settings to
the factory settings
7
You can restore all the copy settings you
have changed to the factory settings. These
settings will stay until you change them again.
a
Press Copy.
b
Press d or c to display
Factory Reset
.
Press Factory Reset.
c
Press Yes.
d
Press Stop/Exit.
Setting your favorites
7
You can store the copy settings that you use
most often by setting them as a favorite. You
can set up to three favorites.
a
Press Copy.
b
Choose the copy option and settings
you want to store.
c
Press d or c to display
Favorite Settings
.
Press Favorite Settings.
d
Press Store.
e
Press the location where you want to
store your setting for Favorite:1,
Favorite:2
or Favorite:3.
f
Do one of the following:
 If you want to rename your setting,
press
to delete characters. Then
enter the new name (up to 12
characters). Press OK.
 If you do not want to rename your
setting, press OK.
g
Press Stop/Exit.
Retrieving your favorite setting
7
When you are ready to use one of your
favorite set of settings, you can recall it.
a
Press Copy.
b
Press
Favorite
.
c
Press the favorite setting you want to
retrieve.
d
Press Start.