Brother iPrint&Scan MFC-8950DW - Manual (Page 45)

Receiving a fax
39
4
Setting the Print Density
4
You can adjust the Print Density setting to
make your printed pages darker or lighter.
a
Press Menu.
b
Press a or b to display Fax.
Press Fax.
c
Press a or b to display
Setup Receive
.
Press Setup Receive.
d
Press a or b to display
Print Density
.
Press Print Density.
e
Press c to make the print darker.
Or, press d to make the print lighter.
Press OK.
f
Press Stop/Exit.
Printing a fax from the
memory
4
If you are using the Fax Storage feature
(Menu, Fax, Setup Receive,
Forward/Page/Store
), you can still print a
fax from the memory when you are at your
machine. (See Fax Storage uu page 32.)
a
Press Menu.
b
Press a or b to display Fax.
Press Fax.
c
Press a or b to display Print Fax.
Press Print Fax.
d
Press Start.
e
Press Stop/Exit.
Receiving faxes into memory
when the paper tray is empty
4
As soon as the paper tray becomes empty
during fax reception, the LCD shows
No Paper
and begins receiving faxes into
the machine’s memory. Put some paper in
the paper tray. (See Basic User's Guide:
Loading paper and print media.)
The machine will carry on receiving the fax,
with the remaining pages being stored in the
memory, if enough memory is available.
Incoming faxes will continue to be stored in
the memory until the memory becomes full or
paper is loaded in the paper tray. When the
memory is full the machine will stop
automatically answering calls. To print the
faxes, put fresh paper in the tray.