Weidmuller ACT20X - Manual (Page 63)

Product Installation / Operation, ACT20X-SAI-HAO (HART-transparent Driver)
1066540000/01/12.11 63
7.6.3 Electrical Connections
Terminal Function Connector Terminal Function Connector
11 Out  41 In –
12 Out + 42 In +
input
channel 1
13 43 In –
14
Ex output
channel 1
44 In +
input
channel 2
21 Out  51 GND
22 Out + 52 +24 V DC
power supply
23 53 NC
24
Ex output
channel 2
54 COM
status relay
Table 7-12: Electrical Connections
7.6.4 Specifications
Features
 HART-compatible for 0.5...2.5 kHz
 Configuration and monitoring via FDT/DTM-Software "WI-Manager".
 The device can be mounted in the safe area and in Zone 2 / Division 2 and receive signals from Zone 0, 1,
2, 20, 21 and 22, as well as Class I/II/III, Division 1, Group A-G.
 The mA current signal inputs are completely electrically isolated.
 The device detects automatically whether an active or passive current signal is connected.
 Extended self diagnostic: Monitoring of error events (e.g. cable breakage) via status relay.
 Front LEDs indicates operation status and malfunction.
 3-way galvanic isolation between input, output and power supply.