Weidmuller ACT20X - Manual (Page 56)

Product Installation / Operation, ACT20X-HAI-SAO (HART-transparent Repeater)
56 1066540000/01/12.11
7.5.3 Electrical Connections
Terminal Function Connector Terminal Function Connector
11 I Passive  41 Out 
12 I Passive + 42 Out +
output
channel 1
13 I Active Return 43 Out 
14 I Active Supply
Ex input
channel 1
44 Out +
output
channel 2
21 I Passive  51 GND
22 I Passive + 52 +24 V DC
power supply
23 I Active Return 53 NC
24 I Active Supply
Ex input
channel 2
54 COM
status relay
Table 7-10: Electrical Connections
7.5.4 Specifications
Features
 HART-compatible for 0.5...2.5 kHz
 Configuration and monitoring via FDT/DTM-Software "WI-Manager".
 The device can be mounted in the safe area and in Zone 2 / Division 2 and receive signals from Zone 0, 1,
2, 20, 21 and 22, as well as Class I/II/III, Division 1, Group A-G.
 The active or passive mA current signal inputs are completely electrically isolated.
 The device detects automatically whether an active or passive current signal is connected.
 The two-channel device can be used as a signal splitter.
 Extended self diagnostic: Monitoring of error events (e.g. cable breakage) via status relay.
 Front LEDs indicates operation status and malfunction.
 3-way galvanic isolation between input, output and power supply.