UVP BioChemi System with EpiChemi II Darkroom - Manual (Page 8)

2.
BioChemi Cooled CCD Assembly and Installation
1. The camera AC power adapter
should be plugged to the wall
with the power cable provided.
2. There are two BNC (video)
connector plugs, Rx and Tx, that
plug into the video sockets on
the camera. Connect the Tx
from the back of the camera to
the Rx connection on the video
board installed in your computer.
Then connect the Rx from the
back of the camera to the Tx
connector on the video board
installed in your computer.
•
Power Connection (plug power
supply into wall outlet)
• Video BNC Connectors
(plug either cable into either slot)
WWW.UVP.COM US Technical Support: 1.800.452.6788
UK Technical Support: +44.0.1223.420022
8