UVP BioChemi System with EpiChemi II Darkroom - Manual (Page 20)

9. Check the Preview tab to make sure there is at least 55 Millisec
entered. Numbers smaller than this will result in the inability to see
a live preview as it is faster than the lower limit of the camera.
Preview Tab
Capture Button
10. Place the UVP target or printed text on the transilluminator for
focusing.
11. To zoom in, turn the zoom lens all the way to the right and adjust
the bottom for fine focus.
12. Adjust the aperture on the zoom lens until you can see your bands
without saturating the image. Oversaturated areas in the preview
will turn red. Make sure there is no red in the image before capture.
You can click the Minimal Dialog button to minimize the menu
area.
13. Click the Capture button to capture the image (saturation areas in
the preview will turn red).
WWW.UVP.COM US Technical Support: 1.800.452.6788
UK Technical Support: +44.0.1223.420022
20