UVP BioChemi System with EpiChemi II Darkroom - Manual (Page 24)

6. If you want to preview and acquire for the same exposure, the Lock
Exposure Times needs to be checked in the Acquire menu.
7. Place the UVP target or printed text on the transilluminator.
8. Zoom in all the way and focus on the lettering on the gel cutter.
9. Adjust the aperture on the zoom lens until you can see your bands
without saturating the image. Oversaturated areas in the preview
will turn red. Make sure there is no red in the image before capture.
You can click the Minimal Dialog button to minimize the menu
area.
10. Click the Capture button to capture the image (saturation areas in
the preview will turn red).
Capture Button
11. If the image captured is not satisfactory, adjust the time on the
integration tab and repeat steps 9 through 11.
WWW.UVP.COM US Technical Support: 1.800.452.6788
UK Technical Support: +44.0.1223.420022
24