UVP BioChemi System with EpiChemi II Darkroom - Manual (Page 32)

Dynamic Integration Total Time Exposure – Accumulated exposure of
pre-set, on-chip integrations over a specified time interval with automatic
Digital Video Playback (DVP) of stacked images.
Application: Blotting with substrates of high signal but limited duration and
low background (ECL Plus).
1. With the Integration tab open, check Dynamic
Integration, Auto Exposure, and Total Time Exposure.
2. Click on the Total Time Settings button and the Dynamic
Integration window will open.
3. Enter total amount of time and total number of frames you
want to capture. This will produce X frames that will be
WWW.UVP.COM US Technical Support: 1.800.452.6788
UK Technical Support: +44.0.1223.420022
32