USG Exterior Ceiling Applications Systems Guide User Manual
Page 49
SC2561/rev. 5-14
© 2014, USG Corporation and/or
its affiliates. All rights reserved.
Printed in U.S.A.
Manufactured by
USG Interiors, LLC
550 West Adams Street
Chicago, IL 60661
Product Information
DXFEV Data Sheet AC3304.
See usg.com for the most
up-to-date product information.
Installation
Must be installed in compliance
with ASTM C636, ASTM E580,
CISCA, and standard industry
practices.
Code Compliance
The information presented is
correct to the best of our knowl-
edge at the date of issuance.
Because codes continue to
evolve, check with a local official
prior to designing and installing
a ceiling system. Other restric-
tions and exemptions may apply.
This is only intended as a quick
reference.
Progressive Engineering
Inc. Evaluation Report
Compliance
Wind load tested and listed
in PEI Evaluation Report,
PER-12055.
Purpose
This technical guide is intended
as a resource for design
professionals, to promote
more uniform criteria for plan
review and jobsite inspection of
projects. This technical guide
indicates an acceptable method
for achieving compliance with
applicable codes and regula-
tions, although other methods
proposed by design profes-
sionals may be considered
and adopted. The renderings
and details provided are for
illustrative purposes only and
are not a substitute for certified
architectural and engineering
drawings.
ICC Evaluation Service, Inc.,
Report Compliance
Suspension systems manu-
factured by USG Interiors, LLC,
have been reviewed and are
approved by listing in ICC-ES
Evaluation Report 1222.
Evaluation Reports are subject
to reexamination, revision and
possible cancellation. Please
refer to usgdesignstudio.com or
usg.com for current reports.
L.A. Research Report
Compliance
D
onn
brand suspension systems
manufactured by USG Interiors,
LLC, have been reviewed and
are approved by listing in the
following L.A. Research Report
number: 25764.
Notice
We shall not be liable for
incidental and consequential
damages, directly or indirectly
sustained, nor for any loss
caused by application of these
goods not in accordance with
current printed instructions or
for other than the intended use.
Our liability is expressly limited
to replacement of defective
goods. Any claim shall be
deemed waived unless made
in writing to us within thirty (30)
days from date it was or
reasonably should have been
discovered.
usg.com
seismicceilings.com
sustainableceilings.com
usgdesignstudio.com
Trademarks
The following are trademarks
of USG Interiors, LLC. or a
related company: a
qua
-t
ough
,
AX, C
elebration
, ClimaPlus,
D
onn
, D
uroCk
, Fiberock,
F
ineline
, P
araline
, P
araline
P
lus
,
s
eCuroCk
, s
heetroCk
, USG, USG
in stylized letters, and ZXLA.
Safety First!
Follow good safety/industrial
hygiene practices during
installation. Wear appropriate
personal protective equipment.
Read SDS and product literature
before specification and
installation.