USG Exterior Ceiling Applications Systems Guide - Manual (Page 43)

42 USG Exterior Ceiling Applications
Accessories
Compression Post
The USG D onn ® Brand Compression Post provides rigid support for ceiling suspension systems in exterior
applications. The telescoping compression posts attach to the main tees and P
araline
symmetrical carriers ¹
preventing upward movement of the system.
Features – Factory-engineered solution provides rigid support for ceiling suspension systems in exterior applications and
offers quick installation thus reducing field labor time.
– Availabe in six different telescoping sizes that meet requirements and includes fast delivery.
Item No. Size
VSA 18/30 189 to 309
VSA 30/48 309 to 489
VSA 48/84 489 to 849
VSA 84/102 849 to 1029
VSA 102/120 1029 to 1209
VSA 120/144 1209 to 1449
– Injection-molded, high-impact clip snaps onto the bulb of the main tee for a secure, positive connection.
– When used with P araline systems, P araline compression post adapters¹ connect the post to the Paraline
symmetrical carrier for a secure, positive connection.
– Heavy-wall galvanized steel tubing, no-rust telescoping post locks into permanent support length.
– Injection-molded guide ring prevents rattling.
– Spring steel top clip for attachment to vertical hanger wire adjacent to post
– The adjustable self-locking connection has been tested and certified to a minimum compressive load of 900 lb.
– Meets UL797
Components End Plug Top Clip Hanger Wire Spring Clip Attachment
Spring Clip Holes (Top of Post)
Note: The end plug, top clip and hanger wire spring clip are included with each post.
¹ When used with Paraline systems, Paraline compression post adapters must be purchased. The end plug of the compression
post is removed and replaced with the Paraline compression post adapter prior to installation. The Paraline compression post
adapter is not included with each compression post and must be purchased separately.