Regency Horizon HZ42STE Medium Gas Fireplace - Manual (Page 55)

Regency Horizon™ HZ42STE Gas Fireplace
55
MAINTENANCE
VALVE TRAY REPLACEMENT
1) Turn the unit off and allow it to cool down to room temperature.
2) Turn off the gas and power supply to the unit.
3) Remove the faceplate by lifting it up off the glass door.
5) Remove bottom cover by lifting up and out.
6) Remove burner by removing 2 screws.
7) Slide burner away from the pilot and lift out.
4) Remove the glass door.
a) Remove the 3 screws shown below at the bottom of the glass
door
.
b) Swing the door out 45 o from the bottom and lift up and out.
Faceplate
Glass Door
Aerial View of the burner shown.
ON/OFF Connector Wires
8) Disconnect the ON/OFF connector wires from the valve.
Screw locations
9) Remove the valve assembly by undoing 12 screws.
X X
X X
X
X X
X X X
X