beautypg.com

Installation, Gt remote installation – Regency Horizon HZ42STE Medium Gas Fireplace User Manual

Page 37

background image

Regency Horizon™ HZ42STE Gas Fireplace

37

INSTALLATION

Note: DO NOT USE 4 AA batteries in the battery pack on the tray - the

DFBC is now powered by the receiver batteries in the wall.

DFBC = digital fi replace burner control

1)

Remove the faceplate and glass door to access to DFBC &
battery pack tray.

2)

Lift DFBC and battery pack up and out.

3) Disconnect connector from battery holder and remove from tray – (battery

holder is attached by Velcro to tray).

4) Remove the 4 AA batteries if installed, reconnect the connector to the

battery pack and put back onto Velcro strip

5) Locate the DFC wire from the receiver wire harness and connect to the

DC supply wire from the DFBC.

HZ42E

HZ42E

HZ42STE

HZ42STE

GT REMOTE INSTALLATION