Sunnex CS2050D-MRI (Dual Ceiling) - Manual (Page 23)

Sunnex Celestial Star MRI Service & Installation Manual
23
4.3 CELESTIAL STAR DUAL CEILING CS2050D-MRI
Before you get started!
*Drawing of dual mounting bracket provided in the Appendix
*The dual mounted Celestial Star comprises two identical single ceiling mounted lights. The two lights are to
be mounted back to back by creating structures described in the single arm installation procedures above. If
installing the dual light above a drop ceiling, the flat, plastic ceiling covers (provided) can be used to cover
the hole in the drop ceiling created for the extension arms.
*If the distance between the fixed ceiling and the drop ceiling is large, an additional support structure must
be constructed to allow for mounting of the lights at the appropriate height. Please refer to section 4.2 for
directions.
*The total weight of the light is 130 pounds (59kg). NEVER attempt to affix a ceiling light to a drop (false)
ceiling.
*The dual mounted Celestial Star requires two (2) transformer boxes and two RF filters (if mounted outside
MRI room).
The dimensions and recommended installation height is identical to the single arm Celestial Star. Please
refer to the single arm installation instructions for complete details and illustrations in Section 4.2.
CAUTION! IF CONSTRUCTING ADDITIONAL SUPPORT STRUCTURES TO INSTALL
THE LIGHT, THE LIMITATIONS AND REQUIREMENTS OF THE MRI ENVIRONMENT
MUST BE CONSIDERED. NON-MAGNETIC MATERIALS SHOULD BE USED. CONSULT
WITH YOUR MRI FACILITY MANAGER IF UNCERTAIN.
Figure 11: Dual mounted Celestial Star Ceiling with Seismic Bracket