Aeris system troubleshooting – STEMCO Aeris Inflation System Troubleshooting User Manual
Page 4
Aeris System Troubleshooting
Sept 2013
Page 4 of 18
About This Manual
This manual is provided to support the STEMCO Aeris tire inflation system. The manual provides the
following information needed to service and troubleshoot the Aeris system.
Explanation of Words
Please pay attention to special symbols used through this manual to convey important information.
Hazard signal words such as DANGER, WARNING, CAUTION, or NOTICE are used throughout this
manual. Information accented by these words indicates a point of emphasis and importance. The
following definitions comply with ANSI Z535.4 and indicate the use of signal words as they appear
within this manual.
!
DANGER: Indicates immediate hazards which will result in severe personal injury or death.
!
WARNING: Indicates hazards or unsafe practices which could results in severe personal injury or
death.
!
CAUTION: Indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.
NOTICE: Indicates hazards or unsafe practices which could result in damage to machine or
equipment.
IMPORTANT: An operating procedure, practice or condition that is essential to emphasize.
!
Safety alert symbol used to indicate a condition exists that may result in personal injury or harm to
individuals. It must be applied to DANGER, WARNING and CAUTION statements which emphasize
severity.
IMPORTANT: Please pay special attention to the information supplied in the Explanation of Words
section. These words are used to help prevent immediate hazards, unsafe practices, severe
personal injury or death and damage to machines or equipment.