Stainless Works Ford Taurus SHO Downpipe - Manual (Page 2)

WWW.STAINLESSWORKS.NET 800-878-3635 FAX: 440-543-9183
16. Re-install O2 sensors using extension supplied for the rear of the front (driver
side) down pipe.
17. Re-install downpipes to exhaust using (4) 7/16 bolts, washers, and lock nuts.
18. Be sure to have adequate clearance around all wires, hoses and lines. If anything
is in contact with the exhaust system, it will melt. Make sure to have at least
½” of clearance and wrap any suspect areas with DEI thermal barrier wrap.
19. After double checking for clearance and making sure all lines, wires and hoses are
secured, drive the car for 10-20 miles and re-check all clamps and clearances.