beautypg.com

Stainless Works Chevy Camaro 2010-14 SideBurners Modular-Exhaust User Manual

Page 2

background image

WWW.STAINLESSWORKS.NET

800-878-3635

FAX: 440-543-9183


















7. Install the hanger bolts in the rocker panel (see photo below).















8. The two formed half-tubes at the inlet ends of the Sideburners are formed to fit

around the 2-1/2” dia. factory exhaust. Place two of the 2-1/2” dia. clamps on
each of the factory pipes adjacent to the new hole locations.

9. Install the side exhaust tip onto the hangers using one 3/8” flat washer and nyloc

nut for each side. Do not tighten yet.

10. Apply a ¼” to 3/8” dia. bead of silicon around the drilled holes at both locations.

Install Sideburners onto factory exhaust pipes, and lightly snug up the clamps.

This manual is related to the following products: