Stainless Works Chevy SS Exhaust: 3" Dual Chambered System 2014 - Manual (Page 3)

WWW.STAINLESSWORKS.NET 800-878-3635 FAX: 440-543-9183
15. Install mufflers using (2) 3” clamps.
16. Reinstall cross member using factory bolts and spacers provided.
17. Adjust and tighten system starting from front to back.
18. Reconnect battery and lower vehicle.
19. After double checking for clearance and making sure all lines, wires and hoses are
secured, drive the car for 10-20 miles and re-check all clamps and clearances.
Your system may be tack welded at the joints/ clamps to reduce shifting of the
system during heating and cooling cycles. Make certain to disconnect the battery
before performing any welding.