Skyjacker FJ730K - Manual (Page 4)

FINAL NOTES:
* After the installation is complete, double check that all nuts & bolts are tight.
* Check to ensure there is adequate clearance between All rotating, mobile & fixed members. Check
the clearance between the inner side wall of tires.
* Ensure there is adequate clearance between the exhaust & brake lines, fuel lines, fuel tank, floor
board, & wiring harnesses. Check the steering gear for interference & proper working order.
Inspect the brake lines for damage & adequate clearance. Test the brake system.
* With the vehicle on the ground, cycle the steering lock to lock & inspect the steering, suspension,
drive line, & brake line systems for proper operation, tightness, & adequate clearance.
* Have a qualified alignment center realign the vehicle to the OEM specifications.
Seat Belts Save Lives, Please Wear Your Seat Belt.
I-FJ730 Pg 4
TORQUE SPECIFICATIONS
INCh SYSTEM
Bolt Size Grade 5 Grade 8
5/16 15 FT LB 20 FT LB
3/8 30 FT LB 35 FT LB
7/16 45 FT LB 60 FT LB
1/2 65 FT LB 90 FT LB
9/16 95 FT LB 130 FTLB
5/8 135 FT LB 175 FT LB
3/4 185 FT LB 280 FT LB
METRIC SYSTEM
Bolt Size Class 8.8 Class 10.9
6MM 5 FT LB 9 FT LB
8MM 18 FT LB 23 FT LB
10MM 32 FT LB 45 FT LB
12 MM 55 FT LB 75 FT LB
14MM 85 FT LB 120 FT LB
16MM 130 FT LB 165 FT LB
18MM 170 FT LB 240 FT LB
• The above specifications are not to be used when the bolt is being installed with a bushing.