Skyjacker FJ730K - Manual (Page 3)

15. Reattach the ABS line / brake line & sway bar end links.
16. Reinstall the front tires / wheels & lower the vehicle to the ground.
Rear Installation:
17. Raise the rear of the vehicle & properly support the frame rails using
jack stands.
18. Remove the rear tires / wheels & rear shocks. (See Photo # 10)
19. It will be necessary to disconnect the brakeline brackets & sway bar
end links from the axle to allow for the installation of the new
Skyjacker rear coil springs. Disconnect the track bar from the frame.
(See Photo # 11)
20. Remove the OEM rear coil springs & replace with the new
Skyjacker rear coil springs. Be sure to retain the OEM upper bump
stop. (See Photo # 12)
21. Reattach the track bar & brakelines. Install the new Skyjacker sway
bar end links using the supplied bushings & hardware. (See Photo
# 13)
22. Install the new Skyjacker rear shocks. Be sure to install the
aluminum spacer supplied with the shock between the OEM mount
& the new rear shock. This will allow for proper clearance between
the shock body & axle. (See Arrow in Photo # 14)
23. Install the rear tires / wheels & lower the vehicle to the ground.
Pg 3 I-FJ730
Photo # 10
Photo # 11
Photo # 12
Photo # 13
Photo # 14