Sensaphone 1400 - Manual (Page 73)

Chapter 5: Communication Programming
71
ALARM HISTORY
The 1400 will retain historical information on the last 10 alarms.
The information retained includes: Zone number, the time/date that
the alarm occurred, and the User number that acknowledged the
alarm.
To hear the Alarm History:
1. Press the WHAT IS key.
2. Press the HISTORY key.
The unit will recite the history for the last 10 alarms. A sample
report is shown below:
“Zone 1 (custom message) alarm high at 3:31
pm
April 8, 2005
acknowledged by number 4”
“Zone 3 (custom message) alarm low at 2:35
am
March 27, 2005
acknowledged by number 1”
In Single-User mode, the report will state “Alarm acknowledged”
for alarms acknowledged via telephone. It will state “Manual
acknowledgment” for alarms acknowledged at the keypad. In
Multiple-User mode, the report will state the user number that
acknowledged the alarm. If the maximum number of calls have
been made, the report will state “Automatic acknowledgment.”
Deleting the Alarm History:
The Alarm History can be deleted by pressing SET, then HISTORY.
The 1400 will say “Erased.”