Sensaphone 1400 - Manual (Page 100)

Sensaphone 1400 Manual
98
The tables below list all of the touch-tone commands that are
supported. Commands are listed in both character and numeric
formats. The # key is used as an ENTER key. Use the * key to
represent a negative sign or to represent the [CODE] key when
programming telephone numbers.
Enable/Disable Zones
This command will toggle the selected zone between the
enabled or disabled state.
Description Touch-Tone Command
Enable/Disable Zone * + Z(0) + (zone number)
Set and Recite High & Low Alarm Limits
The following commands are used to set or recite the Low
Alarm Limit for any Zone.
Description Touch-Tone Command
Set Zone Low Limit S(7) + L(5) + (zone number) + (value) + #
Description Touch-Tone Command
What Is Zone Low Limit W(9) + L(5) + (zone number)
The following commands are used to set or recite the High
Alarm Limit for any Zone.
Description Touch-Tone Command
Set Zone High Limit S(7) + H(4) + (zone number) + (value)+ #
Description Touch-Tone Command
What Is Zone High Limit W(9) + H(4) + (zone number)
Set and Recite Telephone Numbers
The following commands will allow you to program and recite
dialout telephone numbers. You may need to use the Special
Dialing Codes below.