Sensaphone 1400 - Manual (Page 37)

Chapter 4: Zone Programming
35
On/Off ” to indicate enabled or disabled respectively.
3. Repeat the steps to change.
ENABLE/DISABLE POWER
This function allows you to enable or disable AC power failure
monitoring (0). Enabled AC power monitoring will respond to an
alarm and allow dialout. Disabled AC power monitoring will not
initiate a dialout alarm. The default setting is enabled (on).
1. Press the SENSOR ON/OFF key.
2. Press the power key (0) to enable/disable. 1400 will say “Power
Alarm On/Off ” to indicate enabled/disabled.
3. Repeat the steps to change.
CONFIGURE TEMPERATURE SCALE
The 1400 can read temperature in degrees Fahrenheit or Celsius.
The default is degrees Fahrenheit.
1. Press the SENSOR ON/OFF key.
2. Press the F/C key.
The 1400 will say “degrees Fahrenheit” or “degrees Celsius” to
indicate the current setting. Repeat the key sequence to change.