Sensaphone 1400 - Manual (Page 36)

Sensaphone 1400 Manual
34
ENABLE/DISABLE ZONE ALARMS
This function allows you to enable or disable a Zone (1-4) for
dialout during an alarm. An enabled Zone will respond to an alarm
and allow dialout. A disabled Zone will not initiate a dialout, but
it will still be included in the status report, preceded by the word
“disabled.” This command is useful while you are wiring your
Zones or at any other time you would like the alarms to be ignored.
The default setting for all Zones is enabled (on).
1. Press the SENSOR ON/OFF key.
2. Press the corresponding number key (1–4) of the Zone you
want to enable/disable. 1400 will say “Zone (1–4) Alarm On/
Off ” to indicate enabled or disabled respectively.
3. Repeat key sequence to change.
ENABLE/DISABLE SOUND LEVEL ALARM
This function allows you to enable or disable the sound alarm
for dialout. When enabled, a high sound level at the remote
microphone (optional)—that meets the programmed recognition
time and level—will trip a sound alarm and the unit will dial out.
Disabling sound will prevent a sound alarm dialout. The default
setting is enabled (on).
1. Press the SENSOR ON/OFF key.
2. Press the Sound Alarm key (9). 1400 will say “Sound Alarm