Sensaphone 1400 User Manual

Page 32

Sensaphone 1400 Manual

Code is enabled (see Chapter Five), and you enter the incorrect
security code, the unit will answer with “Error 2” and offer you a
second chance to enter the correct code.

ACKNOWLEDGING A FALSE ALARM

While programming the unit you may inadvertently set off an alarm.
Once an alarm occurs, the unit will start its alarm processing
routine, which will prevent you from performing any other keypad
function until the alarm is acknowledged. To acknowledge an alarm
and stop the unit from making any phone calls, press [ALARM
CANCEL]. This will acknowledge the alarm (assuming that you
have not entered any custom acknowledgment codes). If you have
entered one or more custom acknowledgment codes, then enter the
code as required.

RECOMMENDED PROGRAMMING STEPS

Listed below are the basic programming steps to get you up and
running. The chapters that follow provide detailed programming
instructions as well as additional options to customize the operation
of your 1400.

Parameter

Chapter #

1. Set the Date & Time

2. Configure Zones

3. Set Alarm Limits

4. Record Zone voice messages

5. Record ID voice message

6. Set ID number

7. Set dialout telephone numbers