SATEC PM135 Manual - Manual (Page 19)

‎Chapter 2 Installation Site Requirements
PM135 Powermeter Series 19
Chapter 2 Installation
This chapter discusses the following types of physical installations for the
PM135 Powermeter:
 Mechanical Installation
 Electrical Installation
 I/O Connections
 COM Port Connections.
2.1 Site Requirements
 Environmental conditions: as specified in Technical Specifications
in Appendix A
 Electrical requirements: as specified in Technical Specifications in
Appendix A
See Technical Specifications in Appendix A for more details
2.2 Package Contents
The PM135 Powermeter package contains the following items:
 PM135 Powermeter unit
 Technical Documentation CD
 Optional accessories (depending on the options ordered, if any)
 Cables
2.3 Mechanical Installation
Refer to the figures provided in this section to properly perform the
mechanical installation.
Figure ‎2-1. Dimensions