Brother NC8100H - Manual (Page 74)

CHAPTER 7 NETBIOS PEER-TO-PEER PRINTING
7-5
Associating the printer
1. You must now create a printer on your Windows ® 95/98/Me and
NT ® 4.0/2000/XP system using the standard Windows ® printer setup
procedure. To do this, go the Start button, select Setting and then
Printers.
Windows ® 95/98/Me
2. Select Add Printer to begin the printer installation.
3. Click Next when you get the add Printer Wizard window.
4. Select Local Printer when you are asked how the printer is connected to
your computer, and then push Next.
5. Select the correct driver. Click Next when you are done.
6. If you have selected a printer driver that is already being used, you have
the option of either keeping the existing driver (recommended) or
replacing it. Select the desired option and press Next.
7. Select the Brother NetBIOS Port (Port name you assigned in step 7 of
the Installing the Brother Peer-to-Peer Print (NetBIOS) section) and
press Next.
8. Enter any desired name for the Brother FAX/MFC and press Next. For
example, you could call the printer "Networked Brother Printer".
9. Windows
®
will now ask you if you wish to print out a test page, select
Yes and then select Finish.
You are now ready to print. If necessary, you can share the printer on your PC so
that all print jobs are routed through your computer.
Windows ® NT ® 4.0/2000/XP
2. Select Add Printer to begin the printer installation.
3. Click Next when you get the add Printer Wizard window.
4. Select Local printer (Windows
® 2000) or Local printer attached to this
computer (Windows ® XP) when you are asked how the printer is
connected to your computer, and then push Next.
5. Select the Brother NetBIOS Port (Port name you assigned in step 6 of
the Installing the Brother Peer-to-Peer Print (NetBIOS) section ) and
press Next.
6. Select the correct driver. Click Next when you are done.
7. If you have selected a printer driver that is already used, you have the
option of either keeping the existing driver (recommended) or replacing
it. Select the desired option and press Next.
8. Enter any desired name for the Brother printer and press Next. For
example, you could call the printer "Networked Brother Printer".
9. Select not Shared or Shared and Share Name and press Next.
10. Windows
® will now ask you if you wish to print out a test page, select
Yes and then select Finish.
You are now ready to print. If necessary, you can share the printer on your PC so
that all print jobs are routed through your computer.