Brother NC8100H - Manual (Page 31)

CHAPTER 2 FRONT PANEL SETUP MENU
2-8
4. Press [Set] to accept the selection.
5. Press [Stop/Exit] to exit the configuration menu.
2-SMTP SERVER
1. Press the [Menu] button to display the configuration menu.
2. Select
LAN.
3. Press [2] [2].
4. Press
! or " to select IP ADDRESS or NAME to select the method of
the entering the SMTP SERVER Address.
5. Enter the SMTP SERVER Address.
6. Press [Set] to accept the selection.
7. Press [Stop/Exit] to exit the configuration menu.
SMTP SERVER Address
This field displays the Host Name or IP address of an SMTP mail server
(outgoing E-mail Server) on your network.
(Ex, mailhost.brothermail.net -or- 192.000.000.001)
3-POP3 SERVER
1. Press the [Menu] button to display the configuration menu.
2. Select
LAN .
3. Press [2] [3].
4. Press
! or " to select IP ADDRESS or NAME to select the method of
the entering the POP3 Server Address.
5. Enter the POP3 Server Address.
6. Press [Set] to accept the selection.
7. Press [Stop/Exit] to exit the configuration menu.
POP3 SERVER address
This field displays the Host Name or IP address of the POP3 server ( incoming
E-mail server) used by the Brother FAX/MFC. This address is necessary for the
Internet Fax features to function correctly.
(Ex, mailhost.brothermail.net -or- 192.000.000.001)
4-MAILBOX NAME
1. Press the [Menu] button to display the configuration menu.
2. Select
LAN.
3. Press [2] [4].
4. Enter the user account name assigned to the Brother FAX/MFC to login
to the POP3 Server.
5. Press [Set] to accept the selection.
6. Press [Stop/Exit] to exit the configuration menu.