Brother NC8100H User Manual
Page 104
CHAPTER 9 NOVELL NETWARE PRINTING
9-17
The following steps apply to configuring a remote printer on NetWare 3.xx
systems:
6.
a.
Select Print / Fax server Information from the PCONSOLE main
menu and choose the name of the PSERVER NLM.
b.
Select Print / Fax server Configuration and then Printer
Configuration. Select any "Not Installed" printer and press Enter.
Remember the number of this printer, since it will be used later in
the configuration process.
c.
If desired, type in a new name for the printer.
d.
Go to Type, press ENTER, highlight Remote Other/Unknown and
press ENTER again. The other settings in this menu are not required.
e.
Push ESCAPE and save the changes.
f.
Push ESCAPE and select Queues Serviced by Printer.
g.
Highlight the printer name that you just configured and press
ENTER.
h.
Press INSERT, choose the desired print queue, and press ENTER
(you can accept the default priority).
i.
Press ESCAPE several times to exit PCONSOLE.