MacDon R85 Rotary Disc 13 Foot Pull-Type - Manual (Page 29)

OPERATION
Form 169454
27
Revision A
6.6 BREAK-IN PERIOD
a. After attaching mower conditioner to tractor for
the first time, operate the machine slowly for 5
minutes, watching and listening FROM THE
TRACTOR SEAT for binding or interfering parts.
NOTE
Until you become familiar with the sound
and feel of your new mower conditioner,
be extra alert and attentive.
CAUTION
Before investigating an unusual sound or
attempting to correct a problem, shut off
tractor, engage parking brake and remove
key.
b. Perform the items specified in to Section 7.13.1
Break-In Inspections..
6.7 PRE-SEASON CHECK
Perform the following the beginning of each
operating season:
CAUTION
• Review the Operator's Manual to refresh
your memory on safety and operating
recommendations.
• Review all safety signs and other decals
on the mower conditioner and note
hazard areas.
• Be sure all shields and guards are
properly installed and secured. Never
alter or remove safety equipment.
• Be sure you understand and have
practiced safe use of all controls. Know
the capacity and operating
characteristics of the machine.
• Check the first aid kit and fire
extinguisher. Know where they are and
how to use them.
a. Check tension on conditioner drive belt, and
adjust if required. Refer to Section 7.9.3
Conditioner Drive Belt.
b. Lubricate machine completely. Refer to Section
7.7 LUBRICATING THE MOWER
CONDITIONER.
c. Check tire pressure and adjust as required. See
Section 7.12.3 Tire Inflation.
d. Perform all annual maintenance. See Section
7.13 MAINTENANCE SCHEDULE.