MacDon A40-D Pull-Type - Manual (Page 29)

SECTION 5 SPECIFICATIONS
169000
27
Revision F
5 SPECIFICATIONS
5.1 PULL-TYPE HEADERS
HEADER SIZE 14 FT 16 FT 18 FT
HEADER MODEL A30-D
FRAME and STRUCTURE
Width n/a 17 ft-9 in. (5410 mm) 19 ft-3 in. (5867 mm)
Length
Transport 26 ft-7 in. (8130 mm)
Field 26 ft-7 in. (8130 mm)
Height
Transport 86 in. (2185 mm)
Field 86 in. (2184 mm)
Approximate Weight (lb [kg]) n/a
8000
(3632)
8200 (3723)
Carrier Pull-Type
Lighting Two Amber and Two Red Transport Lights
Spare Knife Storage Lean Bar
Reversing Wrench /
Guard Straightening Tool
Stored Inside LH Endsheet
Manual Storage RH Endshield
WHEELS
Tires 31 x 13.5 - 15 NHS 8 Ply Terra-Rib
Tread Width 150 in. (3810 mm)
Pressure 30 psi (207 kPa)
CUTTERBAR
Effective Cutting Width
14 ft-9 in.
(4496 mm)
16 ft-3 in.
(4953 mm)
17 ft-9 in.
(5410 mm)
Cutting Height 4 in. (100 mm) Below Ground to 21 in. (533 mm) Above Ground
Guard Angle Adjustment 8–16°
MAIN DRIVE
Tractor Power
Take-Off (PTO)
Driven Gear Pump
1000 rpm PTO 2.01 cu. in. (33 cc) with 3:1 Ratio Gearbox
HEADER DRIVE
Hydraulic M44 (44 cc) Motor To Gearbox
KNIFE
Drive Type
Type Belt Driven Heavy Duty (MD) Knife Drive Box (Enclosed Oil Bath)
Qty Two
Knife Speed
(Strokes Per Minute)
No Load 1983
Load 1912
Stroke 3 in. (76 mm)
Sections Bolted Over-Serrated, 9 Serrations/Inch.
Guards Forged and Double Heat-Treated