beautypg.com

MacDon A40-D Pull-Type User Manual

Page 20

background image

SECTION 2 SAFETY

169000

18

Revision F

11. MD #184372

a. General hazard pertaining to machine

operation and servicing.

b. CAUTION

To avoid injury or death from improper or unsafe
machine operation:

• Read the operator’s manual, and follow

all safety instructions. If you do not have
a manual, obtain one from your dealer.

• Do not allow untrained persons to

operate the machine.

• Review safety instructions with all

operators annually.

• Ensure that all safety signs are installed

and legible.

• Make certain everyone is clear of

machine before starting engine, and
during operation.

• Keep riders off the machine.
• Keep all shields in place, and stay clear

of moving parts.

Disengage header drive, put
transmission in neutral, and wait for all
movement to stop before leaving
operator’s position.

• Shut off engine and remove key from

ignition before servicing, adjusting,
lubricating, cleaning, or

unplugging machine.

• Engage locks to prevent lowering of

header or reel before servicing in the
raised position.

• Use slow moving vehicle emblem, and

flashing warning lights when operating
on roadways unless prohibited by law.

12. MD #184422

a. Keep shields in place hazard

b. WARNING

• To avoid injury, stop engine before

opening power drive system shield.

• Keep all shields in place.

13. MD #194464

a. Shut down for service

b. WARNING

• Remove key from ignition.
• Read tractor and mower manufacturer’s

manuals for inspection, and
maintenance instructions.

(continued next page)

This manual is related to the following products: