Brother BES-1261BC User Manual
Page 43

Chapter 1 Preparation of Embroidery Machine
BES-961BC
•
BES-1261BC
41
y
r
y
t
i
y
r
q
w
e
e t
u
1mm
1mm
■
Holder base (optional)
Attaching the holder base frame
1.
Set the table. (Refer to "3-4 Mounting of Table" (Page 26) for details.)
2.
Mount the frame connecting plate R
w
on the X-axis feed frame
q
, using six bolts, washers,
and nuts.
3.
Insert the frame connecting plate
y
into the holder base frame L
e
, holder base frame C
r
,
and holder base frame R
t
, using bolts and washers.
4.
From the front, put the holder base frame C assembly
r
under the frame connecting plate R
w
and fix it using four bolts.
5.
Check that the clearance between the table and the mounted holder base frame C assembly
r
is even when viewed from the machine front.
[Adjustment]
Loosen three bolts of the F table support F
y
and move it in the direction of the arrow for adjust-
ment.
Felt
Table