Jog embroidering, Hoop feed position – Brother BES-1261BC User Manual
Page 125
Chapter 6 Operation of Machine
BES-961BC
•
BES-1261BC
123
4. Jog Embroidering
• Jog embroidering can be used for preventing
the thread from slipping from the needle at the
start of embroidering.
• Jog embroidering can be executed as long as
the start switch at the machine head is held
down.
Note) Never apply a tape on the switch to keep jog op-
eration for a long time. Doing so may cause dam-
age to the machine.
5. Hoop Feed Position
• In order to ease mounting and dismounting of the embroidery hoop, another needle position can be
set as a hoop feed position in the movable area additionally to the current needle position.
• In order to ease material attachment while operation is suspended, the hoop can be moved to the
feed position at any time by the hoop feed switch.
• The hoop can also be moved to the feed position automatically after embroidering is finished. Refer
to "Hoop Automatic Retract" on Page 105 for details.