Brother BES-1261BC User Manual
Page 102
BES-961BC • BES-1261BC
100
Chapter 5 Setting
Setting of thread breakage error resetting method
4.
Select
by pressing .
5.
Press
for modifying a resetting method.
For setting whether to stop embroidering temporarily at the mending stop
point
4.
Select
by pressing .
5.
Press
and select whether to stop embroidering temporarily.
Setting of thread trimming method after stopping
4.
Select a stop point (number of stitches before a thread breakage) by pressing
ten keys.
Setting of mending stop position
4.
Select a stop point (number of stitches before mending) by pressing ten keys.
The machine does not stop if the automatic step-back setting is lower than the input value.
After setting all items, press
E N D
.
Modified setting is saved and the initial screen is displayed again.
Modify this figure.