Brother BES-1261BC - Manual (Page 106)

BES-961BC • BES-1261BC 104
Chapter 5 Setting
Registration of Sewing Start Position
Register a position to start sewing.
■ When returning to a registered sewing start position, hold down
S T O P
and press
.
1. Press the key.
The hoop coordinates are displayed.
2. Shift the hoop to a position to start sewing by pressing the .
3. Press E N D .
4. Press the key.
Hoop Retract Point
The hoop basic point (retract point) can be set when sewing is interrupted.
■ When restarting sewing after the hoop is retracted during an interrupt, press
S T A R T
.
1. Press .
2. Move the hoop by pressing .
3. Press E N D .
Modified setting is saved and the initial screen or halt screen is displayed again.
The hoop returns to the initial point.
Cancellation of Setting
1. Press once again.
Modified setting is canceled and the initial screen or halt screen is displayed
again. The hoop returns to the initial point.
Current hoop coordinates