Brother BES-1261BC - Manual (Page 107)

BES-961BC • BES-1261BC 105
Chapter 5 Setting
Hoop Automatic Retract
Set whether to move the hoop automatically to the retract point at the end of sewing.
■ This function is previously set to no hoop automatic retract upon shipments.
1. Press .
2. Select whether to retract the hoop automatically by pressing .
For automatically retracting the hoop
For not retracting the hoop automatically
3. Press E N D .
Modified setting is saved and the initial screen or halt screen is displayed again.
Movement to Registered Sewing Start Point
This operation should be done before starting sewing.
1. Hold down
S T O P
and press .
2. The hoop moves and the zero point is detected. Then the hoop moves to a
registered start point.
↓
↓
3. The initial screen is displayed again.