beautypg.com

Opticon PHL 2700-RFDC User Manual

Page 9

background image

U

SER

S MANUAL

PHL2700

TERMINAL

/ IRU2700

CRADLE

9

Follow the next steps to make your terminal
ready for installation in a system, that is
described further in the manual.

2.4.1. Terminal

To avoid drop use the hand strap.

Fix the small cord of the strap around the

pillar of the terminal (ref. 1)

Insert the handle of the strap in the thin

loop (ref. 2)

The strap is fixed to the terminal (ref. 3)
Hold the handstrap around the wrist when

carrying the terminal (ref. 4)

Do not swing the terminal around.

Start with a full battery

To be sure of proper operation, it is

advised to start with a full battery,
charge the battery pack according to the
instructions in the next chapter.

Click the battery pack into the terminal,

as instructed in the next chapter.

!

2.4 ASSEMBLY

2.4.2 Cradle

Place for mounting

Place the cradle in normal office

conditions.

Avoid a place under strong light.

Otherwise IrDA communication may be
disturbed.

Power Connection

Attach the DC jack of the AC adapter

into the socket of the cradle.
Then connect the AC adapter to the
mains outlet

When the terminal PHL2700 with the

rechargeable battery pack is placed in
the cradle, the LED on the cradle turns
green.

When the terminal PHL2700 with

penlite batteries is placed in the cradle, no
indication is given by the cradle.

2.4.3. Terminal on cradle

Take notice that the IRU2700 cradle is designed
for the PHL2700 terminal. No other types of
terminals can be placed into this cradle.

Place the terminal in the cradle as shown in
the illustration:

1

2

3

4

This manual is related to the following products: