Opticon OPN 2002 v35106 Bluetooth OPN2001 simulation Quick Guide - Manual (Page 9)

9
4. Trigger-to-disconnect options
By default the OPN2002 will disconnect by pressing the trigger key for 5 seconds. However, it is
possible to disable or configure a 'trigger-to-disconnect' time between 1 and 9 seconds. These options
can be found in chapter 2.3.4 of the Universal menu book.
5. Auto disconnect options
To save power, it's possible to automatically let the OPN2002 disconnect if it has been idle for the
configured time (ranging between 10 and 60 minutes). Using chapter 2.3.5 of the Universal menu
book the OPN2002 the auto disconnect time can be configured.
Note: On early models of the OPN2002 this feature might not work.
6. Auto reconnect options
By default the OPN2002 won't try to reconnect after a connection loss. However, a reconnect time can
be configured to automatically reconnect after a connection loss. These options can be found in
chapter 2.3.6 of the Universal menu book.
7. Power saving options
The universal menu book (chapter 2.3.7) also lists a number of wireless power saving options to
reduce the power consumption of the OPN2002. These options can be set in this application as well.
However, it is not recommended to use these options, because they increase the response time of the
OPN2002, which in return can cause time-outs on OPN2001 compatible PC applications.