Opticon OPN 2002 v35412 Batch demo Quick Guide - Manual (Page 6)

6
Configuring the CRD2000 cradle (OPN2002 only)
There are no configuration switches on the CRD2000, so the cradle itself won't
have to be configured. The CRD200 cradle works either via USB or via RS232
and both interfaces do not require any configuration.
The USB driver for this cradle can be downloaded from the Opticon web site in
the 'Service and support > software > CRD2000' section.
Configuring the host PC or laptop with NetO32
The OPN2002/3 can transmit its barcode database file to a remote PC or laptop
using the NetO-protocol. The data is transmitted by either a mini-USB cable or
by the CRD2000 multi cradle (OPN2002 only). To be able to receive the files on
the host, you'll need NetO32 to be installed. The latest version of NetO32 can
be downloaded from our web site under 'Service and support' > 'Software' >
'OPN2002/3'. Also more information about additional Neto32 features that aren't
described in this manual can be found the help file of NetO32.
Screenshot of the main window of NetO32