Opticon OPI 4002 - Manual (Page 23)

Opticon
OPI 4002
Instruction Manual
23
8. Appendix B: Menu Barcodes
This section contains the menu barcode labels for the OPI 4002 default settings. Other menu
labels, such as Code Options, String Options, Read Options, and Indicator Options are listed in
the Universal Menu Book. Refer to this guide when programming the scanner for optimal
performance.
8.1. Setting Methods
There are two ways to set the required options: by scanning a Code39 barcode or by
scanning a QR code.
8.1.1. Scanning Code39 Barcodes
To set the required options:
• Scan the Set label.
• Scan the required label.
• Scan the End label in sequence. If several labels in the same option are read,
the last label read is enabled.
8.1.2. Scanning a QR Code
Scan the QR code label directly without reading the Set and End labels.
8.2. Default (Interface) Code Labels
Encryption is enabled by default.
CODE39 labels QR code
label
SET ZZ _ZZ_
IEEE802.15.4 HID C02 _C02_
END ZZ _ZZ_
Table 8: Default (interface) code labels list