Opticon DWT 7133 - Manual (Page 7)

Opticon user's manual
Reading angle 0 - 45
o
in all directions
Resolution at PCS 0.9 0.15 mm (6 mil)
Min. PCS value 0.3
5.1.3 Environmental specifications
Temperature 0 - +50
o
C in operation
-30 - +70 o C in storage
Emission According to EN50081, part 1
Immunity According to EN50082, part 1
Protection against According to IEC529,
dust and moisture IP 65
5.1.4 Physical specifications
Dimensions (l x w x d) 183 x 40 x 22 mm
Case material ABS
Weight 110 g
5.1.5 Functionality
Memory ROM : 32 kB
FlashROM (for O/S and
program): 512 kB
battery backed up RAM
(for data): 128 kB S-RAM
Microcontroller 16-bit CMOS single chip
Real time clock Quartz RTC, time and date
programmable with leap year
handling
Display Alpha-numeric LCD
2 lines x 16 characters
Indicators Piezo buzzer
Good read LED (red/green)
Keyboard 3 Programmable function keys
Programming User applications written in C
may be downloaded via the
cradle.
Transmission speed 2400 - 19200 baud
U SER ’ S MANUAL DWT 7133
13
U SER ’ S MANUAL DWT 7133
12
5.2.3 Functionality
Interfaces supported RS232
(communication to computer)
RS485
(communication to computer)
Serial communication RS232 Baudrate:
2400 - 19200 baud
RS485 Baudrate:
2400 - 19200 baud
Transmission modes Half duplex, RS232
Half duplex RS485
Parity Odd, Even, None
Stop bit 1 or 2
5.2.4 Environmental specifications
Temperature 0 - +50
o
C in operation
-30 - +70
o
C in storage
Emission According to EN50081, part 1
Immunity According to EN50082, part 1
5.1.6 Supported symbologies
Chinese Post 2of5
Codabar incl. ABC and CX
Code 39, incl. full ASCII
Code 93
Code 128
EAN-8 incl. +2,+5
EAN-13 incl. +2,+5
EAN 128
IATA
Industrial 2of5
Interleaved 2of5
ISBN
Italian Pharmaceutical
Laetus
Matrix 2of5
MSI/Plessey
UK/Plessey
S-Code
Telepen
UPC-A incl. +2,+5
UPC-E incl. +2,+5
5.2.1 Electrical specifications
Voltage requirement 220/230 V AC, + 10%,
50/60 Hz,
optional:
110/115 V AC, + 10%,
50/60 Hz,
12V, + 10%, stabilized,
130mA (200mA peak)
Battery charging time First charge:
approx. 15 hours
Normal charge:
approx. 3-4 hours
5.2.2 Physical specifications
Dimensions (l x w x h) 240 x 65 x 58 mm
Case material ABS
Weight 340 g.
Standard connector RS 232:
DB9 female - Mod 8P8
RS485:
Mod 6P6 - Mod 8P8
5.1.1 Electrical specifications
Main battery NI-MH rechargeable
Main battery operating time
When making every 5 seconds 1 scan with
1 sec reading LED on and 0.2 sec. green LED
on and 0.2 sec. buzzer on, operating time is:
approx. 9 hours
Different operation conditions affect the
operating time
Backup battery Lithium,
recharged from main battery
Backup battery If fully charged: 2 weeks
operating time backup time
Battery management Indicators for battery
voltage and remaining
charge can be defined by
user application.
When battery is low the
terminal switches off
automatically.
Charging method Contactless via cradle
5.1.2 Optical specifications
Light source Red light LED: 660 nm
optional:
Infra red light LED: 940 nm
Photo sensor PIN photo diode
Scan velocity res. 0.15 mm / PCS.09 :
50 -800 mm/s
res. 0.25-0.40 mm / PCS 0.9 :
50-2000 mm/s
TECHNICAL
SPECIFICATIONS
3
5
5.1 DWT7133 TERMINAL
5.2 DCW9931 CRADLE