Bryant PACKAGED HEAT PUMP 548J - Manual (Page 5)

5
FACTORY OPTIONS AND/OR ACCESSORIES
Table 1 – FACTORY--INSTALLED OPTIONS AND FIELD--INSTALLED ACCESSORIES
CATEGORY ITEM
FACTORY
INSTALLED
OPTION
FIELD
INSTALLED
ACCESSORY
Cabinet Thru---the---base electrical connections X X
Coil Options
Cu/Cu indoor and/or outdoor coils X
Pre---coated outdoor coils X
Premium, E---coated outdoor coils X
Condenser Protection Condenser coil hail guard (louvered design) X X
Controls
Thermostats, temperature sensors, and subbases X
RTU---MP Multi---protocol controller X
Smoke detector (supply and/or return air) X
Time Guard II compressor delay control circuit X
Phase Monitor X
Economizers
& Outdoor Air
Dampers
EconoMi$er IV (for electro---mechanical controlled RTUs) X X
EconoMi$er2 (for DDC controlled RTUs) X X
Motorized 2 position outdoor---air damper X X
Manual outdoor---air damper (25% and 50%) X
Barometric relief 1 X X
Power exhaust X
Economizer Sensors &
IAQ Devices
Single dry bulb temperature sensors 2 X X
Differential dry bulb temperature sensors 2 X
Single enthalpy sensors 2 X X
Differential enthalpy sensors 2 X
CO
2
sensor (wall, duct, or unit mounted) 2 X X
Electric Heat
Electric Resistance Heaters X
Single Point Kit X
Indoor Motor & Drive
Multiple motor and belt drive packages X
Electric Drive, X13, 5---speed/torque (3---5 ton) X
Low Ambient Control Motormaster head pressure controller 3 X
Power
Options
Convenience outlet (powered) X
Convenience outlet (unpowered) X
Non---fused disconnect X
Roof Curbs
Roof curb 14” (356mm) X
Roof curb 24” (610mm) X
NOTES:
1. Included with economizer.
2. Sensors for optimizing economizer.
3. See application data for assistance.
548J